# gemtechpcb.com ## Posts - [PCB Via Fill: What Resin, Copper, and Capping Each Change](https://www.gemtechpcb.com/blog/pcb-via-fill/): Compare resin and copper via fill, caps, and solder mask coverage. Learn what each changes inside a plated via and what to specify before fabrication. - [Via-in-Pad and VIPPO: When a Via in a Pad Needs Filling and Copper Capping](https://www.gemtechpcb.com/blog/via-in-pad-pcb/): Learn when via in pad needs a filled and copper-capped surface, how open holes can affect solderable pads, and when a dogbone via can stay outside the pad. - [HDI PCB Guide: Microvias, Stackups, and Manufacturing Choices](https://www.gemtechpcb.com/blog/hdi-pcb-guide/): Understand HDI PCB structures, microvias and sequential lamination. Compare routing options, manufacturing tradeoffs and the files needed for review. - [Blind Via PCB: Layer Spans, Buried Vias, and Process Choices](https://www.gemtechpcb.com/blog/blind-via-pcb/): Compare blind via PCB and buried via structures by layer span and process order. Confirm the stackup, hole size and drill pair details before fabrication. - [PCB Microvias: How to Compare Landing Interfaces, Stacked and Staggered Structures](https://www.gemtechpcb.com/blog/microvia-pcb/): Compare PCB microvias by layer span, target copper, stacked or staggered placement, and the drawing details a fabricator needs to review each connection. - [PCB Surface Finish: Solder Pads and Contact Areas](https://www.gemtechpcb.com/blog/pcb-surface-finish-selection/): Choose a PCB surface finish by separating solder pads from edge contacts, then compare each finish against assembly, storage, and connector requirements. - [Standard PCB Thickness: Finished Thickness, Tolerance, and Mechanical Fit](https://www.gemtechpcb.com/blog/pcb-thickness-selection/): Learn how to choose PCB thickness for mechanical fit, define finished thickness and tolerance, set a measurement basis, and review how stackup changes affect hole aspect ratio and controlled impedance. - [PCB DFM review before manufacturing: files, dimensions, and engineering approval](https://www.gemtechpcb.com/blog/pcb-dfm-checklist-before-manufacturing/): This PCB DFM checklist shows how to align design and manufacturing files, check dimensions and process conditions, resolve engineering questions, and release one approved manufacturing package. - [Multilayer PCB Manufacturing Process: From Inner-Layer Imaging to Bare-Board Inspection](https://www.gemtechpcb.com/blog/multilayer-pcb-manufacturing-process/): Follow a common mechanically drilled multilayer bare-board route from imaging and lamination through plating, solder mask, and inspection. Steps vary by stack-up, hole types, and surface finish. - [8-Layer PCB Stackup: How to Read Signal and Reference Planes](https://www.gemtechpcb.com/blog/8-layer-pcb-stackup/): Start with signal and reference-plane relationships. Then compare two 8-layer assignments and read the core, prepreg, dielectric-gap, impedance, and drill records. - [6-Layer PCB Stackup: How to Assign Signal, Ground, and Power Layers](https://www.gemtechpcb.com/blog/6-layer-pcb-stackup/): Compare signal, ground, and power layer options, check reference paths and dielectric spacing, and review project-specific material and lamination data before requesting a quote. - [4-Layer PCB Stackup: How to Choose Ground and Power Layers](https://www.gemtechpcb.com/blog/4-layer-pcb-stackup/): Compare two four-layer sequences by the reference beside each outer signal, the room left for power, and the return path at a layer change. Then separate total board thickness from signal-to-plane spacing and prepare one matching fabrication package. - [Multi-layer Printed Circuit Board: A Complete Guide](https://www.gemtechpcb.com/blog/multi-layer-printed-circuit-board-guide/): Multi-layer printed circuit board guide to layers, materials and fabrication. Compare stackups, cost factors and files for a bare-board quote. ## Pages - [PCB Blog](https://www.gemtechpcb.com/blog/): PCB design and manufacturing insights. - [PCB Manufacturing Capability](https://www.gemtechpcb.com/pcb-manufacturing-capability/): Compare prototyping and mass production capabilities across standard and advanced PCB technologies. - [RF & Microwave PCB Manufacturing](https://www.gemtechpcb.com/pcb-manufacturing/rf-microwave-pcb/): GemTech PCB specializes in high-frequency RF and microwave PCB manufacturing for 5G base stations, 77 GHz automotive radar, and satellite communications. - [PCB Products & Capabilities | GemTech PCB](https://www.gemtechpcb.com/pcb-manufacturing/): Engineering-led PCB manufacturing from prototype review to consistent volume production. - [HDI PCB Manufacturing & Feasibility Review | GemTech PCB](https://www.gemtechpcb.com/pcb-manufacturing/hdi-pcb/): GemTech PCB is a China-based HDI PCB manufacturer who delivers end-to-end High-Density Interconnect (HDI) PCB—ranging from early engineering review and prototyping to advanced volume production. - [About GemTech PCB | PCB Manufacturer & Engineering Support](https://www.gemtechpcb.com/about-us/): GemTech PCB works with customers on double-sided and multilayer printed circuit boards, including projects involving HDI, RF and microwave, high-speed and heavy copper structures. - [GemTech PCB Home](https://www.gemtechpcb.com/): Explore multilayer, HDI, RF, high-speed and heavy copper PCB options for your project. [comment]: # (Generated by Hostinger Tools Plugin)