PCB Blog

PCB design and manufacturing insights.

PCB via fill guide cover showing resin fill, copper fill, and a copper cap.
Compare resin and copper via fill, caps, and solder mask coverage. Learn what each changes inside a plated via and what to specify before fabrication.
Via-in-pad PCB guide cover showing vias inside and outside component pads.
Learn when via in pad needs a filled and copper-capped surface, how open holes can affect solderable pads, and when a dogbone via can stay outside the pad.
Six-layer HDI PCB cross-section with a blind microvia and a plated through-hole
Understand HDI PCB structures, microvias and sequential lamination. Compare routing options, manufacturing tradeoffs and the files needed for review.
Editorial cover for the B2 blind and buried via article, with a conceptual layer-span diagram.
Compare blind via PCB and buried via structures by layer span and process order. Confirm the stackup, hole size and drill pair details before fabrication.
Editorial cover for the B3 microvia article with conceptual single, stacked, and staggered structures.
Compare PCB microvias by layer span, target copper, stacked or staggered placement, and the drawing details a fabricator needs to review each connection.
Green printed circuit board with exposed component pads and gold-colored edge contacts.
Choose a PCB surface finish by separating solder pads from edge contacts, then compare each finish against assembly, storage, and connector requirements.
PCB panels viewed from the side, showing copper-colored edges and visible dielectric layers.
Learn how to choose PCB thickness for mechanical fit, define finished thickness and tolerance, set a measurement basis, and review how stackup changes affect hole aspect ratio and controlled impedance.
A row of mechanical PCB drilling equipment in a board-processing area.
This PCB DFM checklist shows how to align design and manufacturing files, check dimensions and process conditions, resolve engineering questions, and release one approved manufacturing package.
Automatic pattern-plating equipment behind a safety rail, with visible signs.
Follow a common mechanically drilled multilayer bare-board route from imaging and lamination through plating, solder mask, and inspection. Steps vary by stack-up, hole types, and surface finish.